Technische Daten

FSC D1931-A Sockel 775

Board Size
µATX: 9.6” x 9.6” (243.8 x 243.8 mm)

Chipset
Intel® 915G

Memory
4 DIMM Sockets (2.5 V), 128 MB - 4 GB, Single or Dual channel,
DDR 400 SDRAM, unbuffered, no ECC
(For details on recommended RAM, please refer to our website)

Processors
Intel® Pentium® 4 Processors, LGA775, 800/ 533 MHz FSB,
Intel® Celeron® Processors, LGA775, 533 MHz FSB
Support for Hyper-Threading Technology
Compatible with Intel® 04A processors
(For details on processors supported, please refer to our website)

Power Specification
BTX12V (24 Pin) or ATX12V (20 Pin) Power Supply required
Support for Soft-Off Power Supplies
5 V and 3.3 V Supply Voltage on PCI Slots (PCI Rev. 2.3)
3.3 V Auxiliary Supply Voltage on PCI Slots (Wake-Up Function)
On board CPU Voltage Regulator, 5 V / 2 A Auxiliary Power
required for USB Wake-Up from Save-to-RAM, Save-to-Disk

Graphics
Intel® GMA900 Graphics Controller, 333 MHz core frequency, 256-bit
2-D and 32-bit 3-D engine, Motion video acceleration, up to 2048 x 1536
at 75 Hz refresh, integrated 24-bit 400 MHz RAMDAC, Dynamic Video
Memory Technology, upgradeable with PCI Express x16 Graphics Card or
ADD2 Cards to add support for digital displays or TV Out, DDC 2B Support
for Monitor Detection

Audio
Analog Devices AD1986 Dual Mode Codec (AC97/HD Audio), HW 3D
Stereo Enhancement, SW Wavetable Synthesis Support

LAN
Broadcom BCM5751 controller with 10/100/1000 Mbit/s,
Wake-on-LAN (WoL) by interesting Packets, Link Status Change and
Magic Packet™, bootix® BootP or bootix® PXE Support

IDE
1 ATA 100 Interface, up to 2 Drives,
2 Serial ATA 150 Interfaces, up to 2 Drives

External Connectors
1x VGA
1x Audio Mic. In
1x Line in
1x Line out
1x LAN (RJ-45)
1x PS/2 Mouse
1x Keyboard
1x FireWire (6-Pin, IEEE 1394) -
4x USB (2.0, ~480MB/s)
1x Serial (RS232, FIFO, 16550 compatible)
1x Parallel (EPP/ECP)